CAMSHAFT POSITION SENSOR INSTALLATION

PROCEDURE

1. INSTALL CAMSHAFT POSITION SENSOR (w/ DPF)

   
   

   1. Apply a light coat of engine oil to the O-ring.

      Note

      If reusing the camshaft position sensor, be sure to inspect the O-ring.

   2. Install the camshaft position sensor to the timing chain cover assembly with the bolt.

      Torque:

      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

      Note

      
      

      • If a component has been dropped or subjected to a strong impact, replace the camshaft position sensor.

      • Make sure that the O-ring is not damaged or does not jump out of position during installation.

   3. Connect the camshaft position sensor connector.

2. INSTALL CAMSHAFT POSITION SENSOR (w/o DPF)

   
   

   1. Apply a light coat of engine oil to the O-ring.

      Note

      If reusing the camshaft position sensor, be sure to inspect the O-ring.

   2. Install the camshaft position sensor to the cylinder head cover sub-assembly with the bolt.

      Torque:

      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

      Note

      
      

      • If a component has been dropped or subjected to a strong impact, replace the camshaft position sensor.

      • Make sure that the O-ring is not damaged or does not jump out of position during installation.

   3. Connect the camshaft position sensor connector.

3. INSTALL SENSOR BRACKET (w/o DPF)

   
   

   1. Connect the differential pressure sensor connector.

   2. Install the sensor bracket to the cylinder head cover sub-assembly with the nut.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

4. INSPECT FOR ENGINE OIL LEAK

   
   

   1. Start the engine and check that there are no oil leaks.

5. INSTALL NO. 1 ENGINE COVER (w/o DPF)

   Click here