CAMSHAFT POSITION SENSOR INSPECTION

PROCEDURE


  1. INSPECT CAMSHAFT POSITION SENSOR (w/o DPF)


    1. Check the resistance.


      1. A01VFFXE10
        Text in Illustration
        *a

        Component without harness connected

        (Camshaft Position Sensor)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Cold 835 to 1400 Ω
        Hot 1060 to 1645 Ω

        Tech Tips

        In the table above, the terms "Cold" and "Hot" refer to the temperature of the coils. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F).

        If the result is not as specified, replace the camshaft position sensor.