CAMSHAFT POSITION SENSOR INSPECTION

PROCEDURE


  1. INSPECT CAMSHAFT POSITION SENSOR


    1. A01VFFXE10
      Text in Illustration
      *a

      Component without harness connected

      (Camshaft Position Sensor)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Cold 835 to 1400 Ω
      Hot 1060 to 1645 Ω

      Tech Tips

      In the table above, the terms "Cold" and "Hot" refer to the temperature of the coils. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F).

      If the result is not as specified, replace the camshaft position sensor.