ECM(w/o DPF) INSTALLATION

PROCEDURE


  1. INSTALL NO. 1 ECM BRACKET


    1. Using "TORX" socket wrench T25, install the No. 1 ECM bracket onto the ECM with the 2 screws.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

  2. INSTALL NO. 2 ECM BRACKET


    1. Using "TORX" socket wrench T25, install the No. 2 ECM bracket onto the ECM with the 2 screws.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

  3. INSTALL ECM


    1. Install the ECM with the bolt and 2 nuts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }
    2. A01VI37

      Pull down the lever to engage the lock and connect the 2 connectors to the ECM.

      Note

      Make sure that the levers are securely locked.

  4. INSTALL OUTER COWL TOP PANEL

    Click here

  5. INSTALL INNER COWL TOP TO COWL BRACE

    Click here

  6. INSTALL FRONT NO. 1 VENTILATOR SEAL

    Click here

  7. INSTALL FRONT AIR SHUTTER SEAL RH

    Click here

  8. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

    Click here

  9. PERFORM INITIALIZATION

    Click here