PROCEDURE
INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY (for TMC Made)
Install the No. 3 parking brake cable assembly onto the backing plate with the bolt.
Install cable clamp B onto the rear axle beam.
Note
Securely install the clamp.
Tech Tips
When reusing the parking brake cable assembly, replace cable clamp B with a new part.
Tighten the 5 bolts.
Pass the parking brake cable through a new cable clamp A, and then install cable clamp A onto the stud bolt.
Note
Securely install the clamp.
Connect the No. 3 parking brake cable assembly onto the parking brake equalizer.
INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY (for TMMF Made)
Install the parking brake cable onto the backing plate.
Install cable clamp B onto the rear axle beam.
Note
Securely install the clamp.
Tech Tips
When reusing the parking brake cable assembly, replace cable clamp B with a new part.
Tighten the 5 bolts.
Pass the parking brake cable through a new cable clamp A, and then install cable clamp A onto the stud bolt.
Note
Securely install the clamp.
Connect the No. 3 parking brake cable assembly onto the parking brake equalizer.
INSTALL NO. 2 PARKING BRAKE CABLE ASSEMBLY
Tech Tips
Use the same procedure for the RH side as for the LH side.
INSTALL FUEL TANK COVER VENT CASE SUB-ASSEMBLY
INSTALL FRONT NO. 2 FLOOR HEAT INSULATOR (except 1ND-TV)
INSTALL REAR BRAKE SHOE KIT (for TMC Made)
INSTALL REAR BRAKE SHOE KIT (for TMMF Made)
INSTALL REAR BRAKE DRUM SUB-ASSEMBLY
INSTALL REAR WHEEL
ADJUST PARKING BRAKE LEVER TRAVEL
INSTALL REAR CONSOLE BOX ASSEMBLY