REAR BRAKE(for Drum Type) INSTALLATION

Click here Click here

PROCEDURE

1. Click here

   INSTALL REAR BRAKE DRUM SUB-ASSEMBLY

2. Click here

   ADJUST REAR DRUM BRAKE SHOE CLEARANCE (for TMC Made)

   
   

   1. Provisionally install the hub nuts.

   2. 

      Remove the hole plug, and turn the adjuster to expand the shoe until the drum locks.

      Table 1. Text in Illustration

      *1	Automatic Adjust Lever
      	Expand

   3. 

      Hold the automatic adjust lever away from the adjuster, and contract the brake shoe by turning the adjust bolt using another screwdriver until the drum can rotate smoothly.

      Table 2. Text in Illustration

      *1	Automatic Adjust Lever
      	Contract

      Standard
      12 notches

   4. Install the hole plug.

3. Click here

   BLEED BRAKE LINE

   
   

   • for TMC Made (Click here)

   • for TMMF Made (Click here)

4. Click here

   BLEED CLUTCH LINE (for Manual Transmission)

   
   

   • for 1KR-FE (Click here)

   • for 1NR-FE (Click here)

   • for 1ND-TV (Click here)

5. Click here

   ADJUST REAR DRUM BRAKE SHOE CLEARANCE (for TMMF Made)

   Note:

   Do not use screwdrivers or any other tools to rotate the adjuster.

   
   

   1. Press the brake pedal 30 times (not the parking brake). The clearance between the brake shoes and drum will be adjusted automatically.

6. Click here

   INSTALL REAR WHEEL

   103 N*m

   1050 kgf*cm

   76 ft.*lbf

7. Click here

   ADJUST PARKING BRAKE LEVER TRAVEL

   Click here

8. Click here

   INSTALL REAR CONSOLE BOX ASSEMBLY

   (Click here)