REAR BRAKE(for Drum Type) DISASSEMBLY

PROCEDURE


  1. REMOVE REAR BRAKE SHOE KIT (for TMC Made)


    1. A01VF2BE01

      Using SST, separate the shoe return spring from the front brake shoe.

      SST
      09921-00011

      Note

      Do not damage the wheel cylinder boot.

    2. A01VJ7SE01

      Using SST, remove the shoe hold down spring cup, shoe hold down spring, pin and front brake shoe.

      SST
      09718-00011

    3. Remove the tension spring.

    4. A01VLR4

      Remove the shoe return spring from the rear brake shoe and remove the parking brake shoe strut set.

    5. A01VL4SE05

      Using SST, remove the shoe hold down spring cup, shoe hold down spring, pin and rear brake shoe.

      SST
      09718-00011
    6. A01VG6U

      Using needle-nose pliers, separate the parking brake cable.

  2. REMOVE REAR BRAKE SHOE KIT (for TMMF Made)


    1. A01VJWLE02

      Using SST, remove the return shoe spring.

      SST
      09703-30011

      Note

      Do not damage the wheel cylinder boot.

    2. A01VHJME01

      Using SST, remove the tension spring.

      SST
      09703-30011
    3. A01VGJL

      Using pliers, remove the shoe hold down spring, pin and front brake shoe.

      Note

      Do not disassemble the strut set, and be careful not to damage or bend any of the components.

    4. A01VI42

      Using pliers, remove the shoe hold down spring, pin and rear brake shoe.

    5. A01VGTZ

      Using needle-nose pliers, disconnect the parking brake cable from the parking brake shoe lever.

  3. REMOVE REAR BRAKE AUTOMATIC ADJUST LEVER (for TMC Made)


    1. A01VI9J

      Remove the automatic adjust lever tension spring and remove the automatic adjust lever.

  4. REMOVE REAR DRUM BRAKE BLEEDER PLUG CAP

  5. REMOVE REAR DRUM BRAKE BLEEDER PLUG

  6. REMOVE REAR WHEEL BRAKE CYLINDER ASSEMBLY (for TMC Made)


    1. A01VH52

      Using a union nut wrench 10 mm, separate the brake tube from the rear wheel brake cylinder.

      Tech Tips

      Use a container to catch the brake fluid.

    2. Remove the bolt and rear wheel brake cylinder.

  7. REMOVE REAR WHEEL BRAKE CYLINDER ASSEMBLY (for TMMF Made)


    1. A01VEOM

      Using a union nut wrench 10 mm, separate the brake tube from the rear wheel brake cylinder.

      Tech Tips

      Use a container to catch the brake fluid.

    2. Remove the 2 bolts and rear wheel brake cylinder.

  8. REMOVE REAR WHEEL CYLINDER KIT (for TMC Made)


    1. A01VL3NE02
      Text in Illustration
      *1 Wheel Cylinder Boot
      *2 Wheel Cylinder Piston
      *3 Wheel Cylinder Cup
      *4 Compression Spring

      Remove the 2 wheel cylinder boots from the wheel brake cylinder.

    2. Remove the 2 pistons.

    3. Remove the wheel cylinder cup from each piston.

    4. Remove the compression spring.