FRONT BRAKE FLEXIBLE HOSE INSTALLATION

PROCEDURE

1. INSTALL FRONT BRAKE FLEXIBLE HOSE

   
   

   1. Install the flexible hose with a new union bolt and a new gasket.

      Torque:

      30 N*m  { 310 kgf*cm, 22 ft.*lbf }

      Tech Tips

      Install the flexible hose lock securely into the lock hole in the disc brake cylinder.

   2. Install the flexible hose and speed sensor with the bolt.

      Torque:

      29 N*m  { 300 kgf*cm, 22 ft.*lbf }

      Note

      Install the flexible hose and speed sensor without twisting them.

   3. Install the flexible hose with a new clip.

   4. Using a union nut wrench 10 mm, install the brake tube to the flexible hose while holding the flexible hose with a wrench.

      Torque:

      15 N*m  { 155 kgf*cm, 11 ft.*lbf }

      Note

      Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench Click here.

2. BLEED BRAKE LINE

   
   

   • for TMC Made Click here

   • for TMMF Made Click here

3. BLEED CLUTCH LINE (for Manual Transmission)

   
   

   • for 1KR-FE Click here

   • for 1NR-FE Click here

   • for 1ND-TV Click here

4. INSTALL FRONT WHEEL

   Torque:

   103 N*m  { 1050 kgf*cm, 76 ft.*lbf }