FRONT BRAKE(for TMC Made) DISASSEMBLY

PROCEDURE


  1. REMOVE CYLINDER BOOT


    1. A01VIA6E05
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped in protective tape, remove the set ring and cylinder boot from the disc brake cylinder.

      Note

      Be careful not to damage the brake piston or cylinder.

  2. REMOVE FRONT DISC BRAKE PISTON

    A01VFTYE01
    Text in Illustration
    *1 Cloth

    1. Place a piece of cloth between the piston and disc brake cylinder.

    2. Apply compressed air to remove the piston from the disc brake cylinder.

      CAUTION:

      Do not place your fingers in front of the piston when applying compressed air.

      Note

      Do not spatter the brake fluid.

  3. REMOVE PISTON SEAL


    1. A01VJR0E05
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped in protective tape, remove the piston seal from the disc brake cylinder.

      Note

      Do not damage the inner surface or piston seal groove of the cylinder.

  4. REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP

  5. REMOVE FRONT DISC BRAKE BLEEDER PLUG