VACUUM SWITCHING VALVE INSTALLATION

PROCEDURE

1. INSTALL NO. 2 VACUUM SWITCHING VALVE ASSEMBLY

   
   

   1. Engage the clamp to install the No. 2 vacuum switching valve assembly.

   2. Connect the No. 1 air hose and No. 2 air hose to the No. 2 vacuum switching valve assembly and slide the 2 hose clips to secure them.

   3. Engage the clamp to install the wire harness.

   4. Connect the No. 2 vacuum switching valve assembly connector.

2. INSTALL OUTER COWL TOP PANEL (for LHD)

   Click here

3. INSTALL OUTER COWL TOP PANEL (for RHD)

   Click here

4. INSTALL INNER COWL TOP TO COWL BRACE (for LHD)

   Click here

5. INSTALL INNER COWL TOP TO COWL BRACE (for RHD)

   Click here

6. INSTALL FRONT NO. 1 VENTILATOR SEAL (for LHD)

   Click here

7. INSTALL FRONT NO. 1 VENTILATOR SEAL (for RHD)

   Click here

8. INSTALL FRONT AIR SHUTTER SEAL RH (for LHD)

   Click here

9. INSTALL FRONT AIR SHUTTER SEAL RH (for RHD)

   Click here

10. INSTALL WINDSHIELD WIPER MOTOR AND LINK

    Click here