Click here

BRAKE BOOSTER(for TMMF Made LHD) REASSEMBLY

Click here
Click here

PROCEDURE


  1. Click here

    INSTALL VACUUM SENSOR ASSEMBLY (w/ Stop And Start System)


    1. Install the new check valve grommet to the brake booster assembly.

    2. A01VJN8E02

      Align the matchmarks of the vacuum sensor assembly and install the brake booster assembly.

      Table 1. Text in Illustration
      *a Matchmark
  2. Click here

    INSTALL BRAKE VACUUM CHECK VALVE ASSEMBLY


    1. Install the new check valve grommet to the brake booster assembly.

    2. Install the vacuum check valve assembly to the brake booster assembly.

  3. Click here

    TEMPORARILY INSTALL BRAKE MASTER CYLINDER PUSH ROD CLEVIS


    1. Install the push rod lock nut and brake master cylinder push rod clevis to the brake booster assembly.

      Tip:

      Tighten the push rod lock nut after adjusting the brake pedal height.