BRAKE BOOSTER(for TMC Made LHD) REASSEMBLY

PROCEDURE


  1. INSTALL VACUUM SENSOR ASSEMBLY (w/ Stop And Start System)


    1. Install the new check valve grommet to the brake booster assembly.

    2. A01VEMCE02
      Text in Illustration
      *a Upper Side

      Install the brake vacuum check valve assembly to the brake booster assembly as shown in the illustration.

  2. INSTALL BRAKE VACUUM CHECK VALVE ASSEMBLY


    1. Install the new check valve grommet to the brake booster assembly.

    2. Install the vacuum check valve assembly to the brake booster assembly.

  3. TEMPORARILY INSTALL BRAKE MASTER CYLINDER PUSH ROD CLEVIS


    1. Install the push rod lock nut and brake master cylinder push rod clevis to the brake booster assembly.

      Tech Tips

      Tighten the push rod lock nut after adjusting the brake pedal height.