BRAKE MASTER CYLINDER(for TMC Made LHD) DISASSEMBLY

PROCEDURE


  1. REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY


    1. A01VFXZ

      Fix the brake master cylinder in a vise between aluminum plates.

      Note

      Do not overtighten the vise.

    2. Using a pin punch 5 mm and a hammer, tap out the straight pin and remove the brake master cylinder reservoir sub-assembly.

    3. Remove the 2 grommets from the master cylinder reservoir sub-assembly.

  2. REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

  3. REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER