BRAKE PEDAL(for TMMF Made) REMOVAL

PROCEDURE


  1. REMOVE COMBINATION METER ASSEMBLY

    Click here

  2. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Knee Airbag)

    Click here

  3. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/o Knee Airbag)

    Click here

  4. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (for LHD)

    Click here

  5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (w/o Knee Airbag)

    Click here

  6. REMOVE STOP LIGHT SWITCH ASSEMBLY


    1. A01VDSQ

      Disconnect the connector from the stop light switch assembly.

    2. Disengage the harness clamp from the brake pedal support sub-assembly.

    3. A01VEYD

      Turn the stop light switch counterclockwise and remove the stop light switch.

  7. SEPARATE BRAKE MASTER CYLINDER PUSH ROD CLEVIS


    1. A01VM42

      Remove the brake pedal return spring.

    2. Remove the clip and the push rod pin and separate the push rod clevis from the brake pedal.

  8. SEPARATE NO.2 STEERING INTERMEDIATE SHAFT ASSEMBLY (for LHD)

    A01VKH7E01
    Text in Illustration
    *a Matchmark

    1. Place matchmarks on the No. 2 steering intermediate shaft assembly and steering column assembly.

    2. Loosen bolt A.

    3. Remove bolt B and separate the No. 2 steering intermediate shaft assembly from the steering column assembly.

  9. REMOVE BRAKE PEDAL SUPPORT SUB-ASSEMBLY (for LHD)


    1. A01VLWH

      Remove the 4 nuts and bolt and remove the pedal support.

  10. REMOVE BRAKE PEDAL SUPPORT SUB-ASSEMBLY (for RHD)

    A01VHL9

    1. Disengage the wire harness clamp.

    2. Remove the 4 nuts and bolt and remove the pedal support.