FRONT SPEED SENSOR INSTALLATION

PROCEDURE


  1. INSTALL FRONT SPEED SENSOR


    1. Install the speed sensor onto the steering knuckle with the bolt.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

      Note


      • Check that the speed sensor tip and installation portion are free of foreign matter.

      • Install the speed sensor without turning it from its original installation angle.

    2. Install the No. 1 clamp onto the shock absorber with the bolt.

      Torque:
      29 N*m  { 300 kgf*cm, 22 ft.*lbf }

    3. Install the No. 2 clamp onto the body with the bolt.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

    4. Engage the 2 clamps onto the body.

    5. Install the No. 3 clamp onto the body.

    6. Connect the speed sensor connector.

    7. Engage the clamp onto the body.

  2. INSTALL FRONT FENDER LINER


    1. Install the front fender liner with 7 clips, 2 screws and 4 new grommets.

  3. INSTALL FRONT WHEEL

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }

  4. CHECK ABS SENSOR SIGNAL (w/o VSC)

    Click here

  5. CHECK VSC SENSOR SIGNAL (w/ VSC)

    Tech Tips