BRAKE ACTUATOR(for TMMF Made LHD) REMOVAL

PROCEDURE


  1. DRAIN BRAKE FLUID

    Note

    Immediately wash off any brake fluid that comes into contact with any painted surfaces.

  2. REMOVE BATTERY

    Click here

  3. REMOVE BATTERY TRAY

    Click here

  4. REMOVE BATTERY CARRIER (for 1KR-FE)

    A01VFJJ

    1. Disengage the 4 wire harness clamps and disconnect the wire harness from the battery carrier.

    2. Remove the 4 bolts and battery carrier.

  5. REMOVE BATTERY CARRIER (for 1NR-FE)

    Click here

  6. REMOVE BATTERY CARRIER (for 1ND-TV)

    Click here

  7. REMOVE BRAKE ACTUATOR ASSEMBLY (w/ VSC)


    1. A01VK3P

      Release the lock lever and disconnect the brake actuator connector.

      Note

      Be careful not to allow brake fluid to enter the removed connector.

    2. A01VF3L

      Using union nut wrench 10 mm, separate the 2 brake tubes from the front No. 1 brake tube way.

    3. A01VF3T

      Using union nut wrench 12 mm, separate the 2 brake tubes from the brake master cylinder.

    4. A01VJUZ

      Using union nut wrench 10 mm and union nut wrench 12 mm, separate the 6 brake tubes from the brake actuator.

      Text in Illustration
      A01VL3H Flare Nut 10 mm
      A01VE7C Flare Nut 12 mm
    5. A01VHP6

      Remove the 3 bolts and brake actuator with bracket from the side member.

      Note

      Do not damage the brake tubes or wire harness.

  8. REMOVE BRAKE ACTUATOR ASSEMBLY (w/o VSC)


    1. A01VK3P

      Release the lock lever and disconnect the brake actuator connector.

      Note

      Be careful not to allow brake fluid to enter the removed connector.

    2. A01VF3L

      Using union nut wrench 10 mm, separate the 2 brake tubes from the front No. 1 brake tube way.

    3. A01VF3T

      Using union nut wrench 10 mm, separate the 2 brake tubes from the brake master cylinder.

    4. A01VE5R

      Using union nut wrench 10 mm, separate the 6 brake tubes from the brake actuator.

    5. A01VHP6

      Remove the 3 bolts and brake actuator with bracket from the side member.

      Note

      Do not damage the brake tubes or wire harness.

  9. REMOVE BRAKE ACTUATOR BRACKET ASSEMBLY


    1. A01VE4X

      Remove the 2 nuts, bolt and brake actuator bracket assembly.

  10. REMOVE BRAKE ACTUATOR BOLT CUSHION


    1. Remove the 3 brake actuator case collars from the brake actuator bolt cushion.

    2. Remove the 3 brake actuator bolt cushions from the brake actuator bracket assembly.