VEHICLE STABILITY CONTROL SYSTEM(for TMMF Made), Diagnostic DTC:C1201

DTC Code DTC Name
C1201 Engine Control System Malfunction

DESCRIPTION

If a malfunction in the engine control system is detected, the operations of VSC and TRC are prohibited by the fail-safe function. When the signals from the engine are input normally, the fail-safe is cancelled and the DTC is not stored.

DTC No. DTC Detection Condition Trouble Area
C1201 Engine control system malfunction signal continues for 5 seconds. Engine control system

CAUTION / NOTICE / HINT

Note

When replacing the brake actuator assembly, perform zero point calibration Click here.

PROCEDURE


  1. CHECK ENGINE CONTROL SYSTEM


    1. Clear the DTC (engine control system).

      Engine Type Proceed to
      1KR-FE

      Click here

      1NR-FE

      Click here

      1ND-TV (w/ DPF)

      Click here

      1ND-TV (w/o DPF)

      Click here

    2. Check for the DTC (engine control system).

      Engine Type Proceed to
      1KR-FE

      Click here

      1NR-FE

      Click here

      1ND-TV (w/ DPF)

      Click here

      1ND-TV (w/o DPF)

      Click here

      Result
      Result Proceed to
      DTC C1201 is not output A
      DTC C1201 is output (for 1KR-FE) B
      DTC C1201 is output (for 1NR-FE) C
      DTC C1201 is output (for 1ND-TV (w/ DPF)) D
      DTC C1201 is output (for 1ND-TV (w/o DPF)) E

    A

    CHECK FOR INTERMITTENT PROBLEMS Click here

    B

    GO TO ENGINE CONTROL SYSTEM Click here

    C

    GO TO ENGINE CONTROL SYSTEM Click here

    D

    GO TO ENGINE CONTROL SYSTEM Click here

    E

    GO TO ENGINE CONTROL SYSTEM Click here