VEHICLE STABILITY CONTROL SYSTEM(for TMMF Made), Diagnostic DTC:43

DTC Code DTC Name
43 ABS Control System Malfunction

DESCRIPTION

This DTC is output when the VSC system detects a malfunction in the anti-lock brake system.

DTC No. DTC Detection Condition Trouble Area
43 A malfunction in the anti-lock brake system. Anti-lock brake system

CAUTION / NOTICE / HINT

Note

When replacing the brake actuator assembly, perform calibration Click here.

PROCEDURE


  1. CHECK ANTI-LOCK BRAKE SYSTEM


    1. Check if an ABS DTC is output Click here.

      Result
      Result Proceed to
      DTC is not output (ABS DTC) A
      DTC is output (ABS DTC) B

    B

    REPAIR CIRCUIT INDICATED BY OUTPUT DTC Click here

    A

  2. RECONFIRM DTC


    1. Clear the DTCs Click here.

    2. Turn the ignition switch off.

    3. Start the engine.

    4. Drive the vehicle at a speed of approximately 40 km/h (25 mph) or more for 60 seconds or more.

    5. Check if the same DTC is output Click here.

      Result
      Result Proceed to
      DTC (43) is not output A
      DTC (43) is output (for LHD) B
      DTC (43) is output (for RHD) C

    A

    CHECK FOR INTERMITTENT PROBLEMS Click here

    B

    REPLACE BRAKE ACTUATOR ASSEMBLY Click here

    C

    REPLACE BRAKE ACTUATOR ASSEMBLY Click here