VEHICLE STABILITY CONTROL SYSTEM(for TMMF Made) FAIL-SAFE CHART
-
FAIL SAFE OPERATION
-
If there is a problem with sensor signals or actuator systems, the skid control ECU (brake actuator assembly) prohibits power supply to the brake actuator assembly and informs the ECM of VSC system failure.
The brake actuator assembly turns off each solenoid and the ECM shuts off VSC control (traction control signal) from the skid control ECU (brake actuator assembly) accordingly, which turns out to be as if the ABS, TRC and VSC systems were not installed.
The ABS control will be prohibited, but EBD control will continue as much as possible. If EBD control is impossible, the brake warning light will come on to warn the driver Click here.
-
If system components have any malfunctions before starting control, immediately stop the operation. If system components have any malfunctions during control, gradually stop the control so as not to trigger a sudden change in vehicle conditions.
If it is impossible to control the systems, the warning light comes on to inform the driver of termination of the systems Click here.
Tech Tips
-
If the ABS system malfunctions, the brake system operates normally without the ABS system.
-
If it is impossible to control the systems, the warning light comes on to inform the driver of termination of the systems
ABS, EBD and BA system Malfunction Area Fail-Safe Operation ABS system ABS, BA, TRC and VSC control prohibited BA system ABS, BA, TRC and VSC control prohibited EBD system ABS, EBD, BA, TRC and VSC control prohibited TRC and VSC system: Malfunction Area Fail-Safe Operation Engine control system
(TRC and VSC systems)
Before control: Disables control
During control: Uses only the brakes to effect control
Brake control system
(VSC system)
Before control: Disables control
During control: Disables control (by gradually ending control)
Brake control system
(TRC system)
Before control: Disables control
During control: Disables control (by gradually ending control)
-