DESCRIPTION
The skid control ECU receives the signal sent from the ECM via the CAN communication system. When DTCs indicating a CAN communication system malfunction are output, repair the CAN communication system before repairing each corresponding sensor.
| DTC No. | DTC Detection Conditions | Trouble Areas |
|---|---|---|
| U0073 | When either of following conditions detected:
|
CAN communication system |
PROCEDURE
RECONFIRM DTC
Clear the DTC(s) Click here.
Check if the same DTC(s) is output Click here.
| Result | Proceed to |
|---|---|
| DTC output (w/o Toyota Safety Sense) | A |
| DTC output (w/ Toyota Safety Sense) | B |
| DTC not output | C |
| A |
|
GO TO CAN COMMUNICATION SYSTEM Click here |
| B |
|
GO TO CAN COMMUNICATION SYSTEM Click here |
| C |
|
END |