POWER STEERING ECU(for RHD) INSTALLATION

PROCEDURE

1. INSTALL POWER STEERING ECU ASSEMBLY

   
   

   1. Install the power steering ECU assembly with the 2 nuts.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   2. Connect the 4 connectors.

   3. Engage the wire harness clamp.

2. INSTALL COMBINATION METER ASSEMBLY

   Click here

3. TORQUE SENSOR ZERO POINT CALIBRATION

   Click here

4. ASSIST MAP WRITING

   Click here