| DTC Code | DTC Name |
|---|---|
| C1581 | Assist Map Number Un-Writing |
DESCRIPTION
The power steering ECU assembly outputs this DTC when it determines that the assist map is not written in the ECU.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1581 | Assist map not written in power steering ECU assembly |
|
CAUTION / NOTICE / HINT
Note
If the power steering ECU assembly has been replaced, perform the torque sensor zero point calibration and assist map writing Click here.
PROCEDURE
PERFORM ASSIST MAP WRITING
Perform assist map writing Click here.
| NEXT |
|
CONFIRM DTC
Check for DTCs Click here.
| OK |
|---|
| DTC C1581 is not output. |
Tech Tips
DTC C1581 will be cleared after the assist map is written.
| OK |
|
END |
| NG |
|
CHECK CAN COMMUNICATION SYSTEM
Check if a CAN communication system DTC is output.
w/o Toyota Safety Sense Click here
w/ Toyota Safety Sense Click here
| Result | Proceed to |
|---|---|
| CAN communication system DTC is not output | A |
| CAN communication system DTC is output (w/o Toyota Safety Sense) | B |
| CAN communication system DTC is output (w/ Toyota Safety Sense) | C |
| B |
|
GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) Click here |
| C |
|
GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) Click here |
| A |
|
CHECK ECM
Check if an ECM that complies with the vehicle specifications is installed.
| OK |
|---|
| The ECM that complies with vehicle specifications is installed. |
| Result | Proceed to |
|---|---|
| OK | A |
| NG (for 1KR-FE) | B |
| NG (for 2NR-FKE) | C |
| NG (for 1ND-TV without DPF) | D |
| NG (for 1ND-TV with DPF) | E |
| B |
|
REPLACE ECM Click here |
| C |
|
REPLACE ECM Click here |
| D |
|
REPLACE ECM Click here |
| E |
|
REPLACE ECM Click here |
| A |
|
CHECK VEHICLE TYPE
Check vehicle type.
| Result | Proceed to |
|---|---|
| for LHD | A |
| for RHD | B |
| A |
|
REPLACE POWER STEERING ECU ASSEMBLY Click here |
| B |
|
REPLACE POWER STEERING ECU ASSEMBLY Click here |