REPAIR INSTRUCTION INITIALIZATION


  1. PROCEDURES NECESSARY WHEN CABLE IS DISCONNECTED/RECONNECTED TO BATTERY TERMINAL

    Procedures Necessary when Cable is Disconnected/Reconnected to Battery Terminal
    System Name See Procedure
    Stop and Start System

    Click here

  2. PROCEDURES NECESSARY WHEN ECU OR OTHER PARTS ARE REPLACED

    Procedures Necessary when ECU or Other Parts are Replaced
    Replacement Part Necessary Procedure Effect or Inoperative Function when Necessary Procedure is not Performed See Page
    ECM (for 1ND-TV)

    • Learning values save

    • Learning values write

    • Warning light comes on

    • The deterioration of fuel efficiency

    PRECAUTION (for 1ND-TV w/ DPF) Click here

    PRECAUTION (for 1ND-TV w/o DPF) Click here

    REGISTRATION (for 1ND-TV w/ DPF) Click here

    REGISTRATION (for 1ND-TV w/o DPF) Click here

    Injector assembly (for 1ND-TV)

    • Injector Compensation

    • Pilot Quantity Learning Values Reset

    • Warning light comes on

    • The deterioration of fuel efficiency

    REGISTRATION (for 1ND-TV w/ DPF) Click here

    REGISTRATION (for 1ND-TV w/o DPF) Click here

    INITIALIZATION (for 1ND-TV w/ DPF) Click here

    INITIALIZATION (for 1ND-TV w/o DPF) Click here

    Air fuel ratio sensor (for 1ND-TV) A/F Sensor Compensation Reset

    • Warning light comes on

    • The deterioration of fuel efficiency

    Click here

    DPF catalyst (for 1ND-TV) DPF Deterioration Record Clear

    • Warning light comes on

    • The deterioration of fuel efficiency

    Click here

    Engine assembly (for 1ND-TV)

    • Injector Compensation

    • Pilot Quantity Learning Values Reset

    • Warning light comes on

    • The deterioration of fuel efficiency

    REGISTRATION (for 1ND-TV w/ DPF) Click here

    REGISTRATION (for 1ND-TV w/o DPF) Click here

    INITIALIZATION (for 1ND-TV w/ DPF) Click here

    INITIALIZATION (for 1ND-TV w/o DPF) Click here


    • Diesel throttle body assembly (for 1ND-TV)

    • Electric EGR valve assembly (for 1ND-TV)

    • Turbo charger sub-assembly (for 1ND-TV)

    • Learning values save

    • Learning values write

    		 Engine starting

    Click here


    • ECM (for 1KR-FE)

    • Throttle body assembly (for 1KR-FE)

    		 Input the learning value of the throttle position sensor Rough idle

    Click here


    • Throttle with motor body assembly (for 1NR-FE)

    • Engine assembly (for 1NR-FE)

    • Cylinder head (for 1NR-FE)

    • Camshaft (for intake or exhaust side) (for 1NR-FE)

    • Camshaft timing gear assembly (for intake or exhaust side) (for 1NR-FE)

    • Piston or piston ring (for 1NR-FE)

    • Mass air flow meter (for 1NR-FE)

    • Fuel injector assembly (for 1NR-FE)

    • Fuel pump (for 1NR-FE)

    • Air fuel ratio sensor (for 1NR-FE)

    • Engine coolant temperature sensor (for 1NR-FE)

    • Spark plug

    • Ignition coil assembly (for 1NR-FE)

    • EGR valve assembly (for 1NR-FE)

    • Knock sensor (for 1NR-FE)

    		 Inspection after repairs -

    Click here

    Engine stop and start ECU

    • Read number of starter operations

    • Register number of starter operations

    • Clear A/C information

    • Register A/C information

    • Clear the zero point calibration data

    • Perform zero point calibration of the yaw rate and deceleration sensor

    		 Stop and Start System

    Click here

    Starter assembly Clear number of starter operations Stop and Start System

    Click here


    • Continuously variable transaxle assembly (K411)

    • Oil pressure sensor (K411)

    • ECM

    • Clear the CVT learned values

    • Deceleration sensor 0 point calibration

    • CVT oil pressure calibration

    • Air bleeding of the electric air pump

    		 The deterioration of fuel efficiency

    Click here


      w/ VSC

    • Center airbag sensor assembly

    • Clear the CVT learned values

    • Deceleration sensor 0 point calibration

    • CVT oil pressure calibration

    • Warning light comes on

    • The deterioration of fuel efficiency

    Click here


      w/ VSC

    • Brake actuator assembly (Skid control ECU)

    • Deceleration sensor 0 point calibration

    • Warning light comes on

    • The deterioration of fuel efficiency

    Click here


    • Power steering ECU assembly


    • Steering column assembly (containing the torque sensor)

    • Torque sensor zero point calibration

    • Assist map writing

    • Warning light comes on

    • Power assist stops

    Click here


      w/ Entry and Start System

    • Certification ECU

    • ID code box

    • Steering lock ECU

    • Electrical key transmitter

    • ECM

    • Code registration

    • ECU communication ID registration

    • Wireless door lock control system

    • Engine start

    • Entry operation

    • Steering lock and unlock

    		 Refer to the Service Bulletin for the registration procedure.

      w/o Entry and Start System

    • Transponder key ECU

    • Door control receiver

    • Key

    • ECM

    		 ECU communication ID registration

    • Wireless door lock control system

    • Engine start

    		 Refer to the Service Bulletin for the registration procedure.
    Oil maintenance management system (for 1ND-TV) Oil maintenance information mode reset operation Oil change reminder light is on

    Click here

    Front door window regulator assembly LH or RH (driver side) Motor initialization

    • Jam protection function

    • Power window control system

    Click here