KNOCK SENSOR INSTALLATION

PROCEDURE


  1. INSTALL KNOCK SENSOR


    1. A01VDN8E01
      Text in Illustration
      *a Upper
      A01VE7C Front of Engine

      Install the knock sensor with the bolt as shown in the illustration.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

      Note


      • If a component has been dropped or subjected to a strong impact, replace it.

      • Make sure that each knock sensor is in the correct position.

    2. Connect the connector of the knock sensor.

  2. INSTALL INTAKE MANIFOLD

    Click here