CAMSHAFT POSITION SENSOR REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE BATTERY

    Click here

  4. REMOVE BATTERY TRAY

    Click here

  5. REMOVE CAMSHAFT POSITION SENSOR


    1. B0046PV

      Disconnect the camshaft position sensor connector.

    2. B0046I8

      Remove the bolt and camshaft position sensor from the cylinder head sub-assembly.

      Note

      If a component has been dropped or subjected to a strong impact, replace the camshaft position sensor.