ACCELERATOR PEDAL INSTALLATION

PROCEDURE

1. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY

   
   

   1. Install the accelerator pedal sensor assembly with the 2 bolts.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

      Note

      
      

      • If a component has been dropped or subjected to a strong impact, replace it.

      • Do not disassemble the accelerator pedal sensor assembly.

      • This accelerator pedal sensor assembly does not require lubrication. Do not apply oil or other lubrication to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.

   2. Connect the connector of the accelerator pedal sensor assembly.