THROTTLE BODY INSPECTION

PROCEDURE


  1. INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY


    1. Check the resistance.


      1. A01VI4DE05
        Text in Illustration
        *a

        Component without harness connected

        (Throttle Body with Motor Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard resistance
        Tester Connection Condition Specified Condition
        1 (M-) - 2 (M+) 20°C (68°F) 0.3 to 100 Ω

        If the result is not as specified, replace the throttle body with motor assembly.