THROTTLE BODY INSPECTION

PROCEDURE


  1. INSPECT THROTTLE WITH MOTOR BODY ASSEMBLY


    1. A01VGP4E02
      Text in Illustration
      *a

      Component without harness connected

      (Throttle with Motor Body Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Tester Connection Condition Specified Condition
      1 (M-) - 4 (M+) Always 1.2 to 1.8 Ω

      If the result is not as specified, replace the throttle with motor body assembly.