THROTTLE BODY REMOVAL

PROCEDURE


  1. DRAIN ENGINE COOLANT

    Click here

  2. REMOVE WINDSHIELD WIPER MOTOR AND LINK

    Click here

  3. REMOVE FRONT AIR SHUTTER SEAL RH (for LHD)

    Click here

  4. REMOVE FRONT AIR SHUTTER SEAL RH (for RHD)

    Click here

  5. REMOVE FRONT NO. 1 VENTILATOR SEAL (for LHD)

    Click here

  6. REMOVE FRONT NO. 1 VENTILATOR SEAL (for RHD)

    Click here

  7. REMOVE INNER COWL TOP TO COWL BRACE (for LHD)

    Click here

  8. REMOVE INNER COWL TOP TO COWL BRACE (for RHD)

    Click here

  9. REMOVE OUTER COWL TOP PANEL (for LHD)

    Click here

  10. REMOVE OUTER COWL TOP PANEL (for RHD)

    Click here

  11. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  12. REMOVE AIR CLEANER CAP SUPPORT


    1. A01VKZT

      Slide the clip and remove the air cleaner cap support from the throttle body with motor assembly.

  13. DISCONNECT NO. 1 WATER BY-PASS HOSE


    1. A01VFVI

      Slide the hose clip and disconnect the No. 1 water by-pass hose from the throttle body with motor assembly.

  14. DISCONNECT NO. 2 WATER BY-PASS HOSE


    1. A01VEX4

      Slide the hose clip and disconnect the No. 2 water by-pass hose from the throttle body with motor assembly.

  15. REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY


    1. A01VL7Q

      Disconnect the throttle body with motor assembly connector.

    2. Remove the 3 bolts and throttle body with motor assembly from the intake manifold.

      Note

      If a component has been dropped or subjected to a strong impact, replace the throttle body with motor assembly.

  16. REMOVE THROTTLE BODY GASKET


    1. A01VG6Q

      Remove the throttle body gasket from the intake manifold.