IGNITION COIL AND SPARK PLUG INSTALLATION

PROCEDURE

1. Click here

   INSTALL SPARK PLUG

   
   

   1. Using a 14 mm spark plug wrench, install the 3 spark plugs to the cylinder head sub-assembly.

      20 N*m

      204 kgf*cm

      15 ft.*lbf

      Note:

      If a component has been dropped or subjected to a strong impact, replace the spark plug.

2. Click here

   INSTALL NO. 1 IGNITION COIL

   
   

   1. Install the 3 No. 1 ignition coils to the cylinder head cover sub-assembly with the 3 bolts.

      8.9 N*m

      91 kgf*cm

      79 in.*lbf

      Note:

      If a component has been dropped or subjected to a strong impact, replace the No. 1 ignition coil.

   2. Connect the 3 No. 1 ignition coil connectors.

3. Click here

   INSTALL AIR CLEANER CAP SUB-ASSEMBLY

   Click here