| DTC Code | DTC Name |
|---|---|
| P0125 | Insufficient Coolant Temperature for Closed Loop Fuel Control |
DESCRIPTION
A thermistor is built into the engine coolant temperature sensor and changes its resistance value according to the engine coolant temperature. The structure of the sensor and connection to the ECM are the same as that of the intake air temperature sensor.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| P0125 | Engine coolant temperature does not reach 0°C (32°F), temperature at which feedback starts, despite specified length of time* having elapsed since engine start (3 trip detection logic) |
|
*: Engine idles for 10 minutes.
CAUTION / NOTICE / HINT
Tech Tips
Read freeze frame data using the intelligent tester. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, if the air fuel ratio was lean or rich, and other data from the time the malfunction occurred.
PROCEDURE
CHECK ANY OTHER DTC OUTPUT (IN ADDITION TO DTC P0125)
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the tester on.
Enter the following menus: Powertrain / Engine and ECT / DTC.
Read DTCs.
| Result | Proceed to |
|---|---|
| DTC P0125 is not output | A |
| DTC P0125 and other DTCs are output | B |
Tech Tips
If any DTCs other than P0125 are output, troubleshoot those DTCs first.
| B |
|
GO TO DTC CHART Click here |
| A |
|
INSPECT THERMOSTAT
Inspect the thermostat Click here.
| NG |
|
REPLACE THERMOSTAT Click here |
| OK |
|
CHECK COOLING SYSTEM
Check for defects in the cooling system that might cause the system to be too cold, such as abnormal radiator fan operation or any modification.
| OK |
|
REPLACE ENGINE COOLANT TEMPERATURE SENSOR Click here |
| NG |
|
REPAIR OR REPLACE COOLING SYSTEM |