ENGINE GENERAL MAINTENANCE

CAUTION / NOTICE / HINT

Tech Tips

Perform these procedures after the engine has cooled down.

PROCEDURE


  1. INSPECT DRIVE BELT

    Type See procedure
    1ND-TV

    Click here

    2NR-FKE

    Click here

    1KR-FE

    Click here

    2ZR-FE

    Click here

  2. INSPECT SPARK PLUGS

    Type See procedure
    2NR-FKE

    Click here

    1KR-FE

    Click here

    2ZR-FE

    Click here

  3. INSPECT BATTERY

    Type See procedure
    1ND-TV

    Click here

    2NR-FKE

    Click here

    1KR-FE

    Click here

    2ZR-FE

    Click here

  4. INSPECT AIR CLEANER FILTER


    1. Remove the air cleaner filter.

    2. Visually check that the air cleaner filter is not excessively damaged or oily.

    3. Replace the air cleaner filter with a new one if necessary.

  5. REPLACE AIR CLEANER CASE


    1. Check if foreign matter has accumulated in the bottom of the air cleaner case. If foreign matter has accumulated in the bottom of the air cleaner case, clean the air cleaner case.

      Note

      When cleaning the air cleaner case, prevent any foreign matter from entering into the engine.

  6. REPLACE ENGINE OIL AND OIL FILTER

    Type See procedure
    1ND-TV

    Click here

    2NR-FKE

    Click here

    1KR-FE

    Click here

    2ZR-FE

    Click here

  7. INSPECT ENGINE COOLANT

    Type See procedure
    1ND-TV

    Click here

    2NR-FKE

    Click here

    1KR-FE

    Click here

    2ZR-FE

    Click here

  8. REPLACE ENGINE COOLANT

    Type See procedure
    1ND-TV

    Click here

    2NR-FKE

    Click here

    1KR-FE

    Click here

    2ZR-FE

    Click here

  9. INSPECT INTERCOOLER COOLANT

    Type See procedure
    2ZR-FE

    Click here

  10. REPLACE INTERCOOLER COOLANT

    Type See procedure
    2ZR-FE

    Click here

  11. INSPECT GASKET IN FUEL TANK CAP

    Type See procedure
    1ND-TV

    Click here

    2NR-FKE

    Click here

    1KR-FE

    Click here

    2ZR-FE

    Click here

  12. INSPECT FUEL LINES AND CONNECTIONS, FUEL TANK VAPOR VENT SYSTEM HOSES


    1. Visually check the fuel lines for cracks, leakage, loose connections, deformation or tank band looseness.

  13. INSPECT EXHAUST PIPES AND MOUNTINGS


    1. Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.

  14. INSPECT CHARCOAL CANISTER

    Type See procedure
    2NR-FKE

    Click here

    1KR-FE

    Click here

    2ZR-FE

    Click here