| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Generator rectifier and frame x Generator drive end frame | 4.5 | 46 | 40 in.*lbf | |
| Generator holder with rectifier x Generator rectifier end frame | 2.0 | 20 | 17 in.*lbf | |
| Generator regulator assembly x Generator rectifier end frame | 2.0 | 20 | 17 in.*lbf | |
| Generator brush holder assembly x Generator holder with rectifier | 2.0 | 20 | 18 in.*lbf | |
| Rear end cover x Generator rectifier end frame | 4.4 | 45 | 39 in.*lbf | |
| Rectifier plate x Generator rear end cover | for Nut | 4.4 | 45 | 39 in.*lbf |
| for Screw | 3.9 | 40 | 35 in.*lbf | |
| Generator terminal insulator x Generator holder with rectifier | 4.1 | 42 | 36 in.*lbf | |
| Generator pulley x Generator rotor assembly | SST 1-A and B | 39 | 398 | 29 |
| SST 1-A and 2 | 133 | 1356 | 98 | |
| Generator assembly x Cylinder head sub-assembly | for Bolt A | 34 | 347 | 25 |
| Generator assembly x Timing chain cover sub-assembly | for Bolt B | 34 | 347 | 25 |
| Wire harness clamp bracket x Generator assembly | 8.4 | 85 | 73 in.*lbf | |
| Negative battery terminal x Negative battery cable | 5.4 | 55 | 48 in.*lbf | |
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Bearing retainer plate x Generator drive end frame | 2.3 | 23 | 20 in.*lbf | |
| Generator coil assembly x Generator drive end frame | 5.9 | 60 | 52 in.*lbf | |
| Generator coil assembly x Generator brush holder assembly | 1.8 | 18 | 16 in.*lbf | |
| Generator coil assembly x Generator rear end cover | 4.6 | 47 | 41 in.*lbf | |
| Generator clutch pulley x Generator rotor assembly | with out SST | 111 | 1127 | 82 |
| with SST | 84 | 857 | 62 | |
| Generator assembly x Cylinder head sub-assembly | 34 | 347 | 25 | |
| Wire harness clamp bracket x Generator assembly | 8.4 | 85 | 73 in.*lbf | |
| Terminal B x wire harness | 9.8 | 100 | 787 in.*lbf | |
| Negative battery terminal x Negative battery cable | 5.4 | 55 | 48 in.*lbf | |
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Bearing retainer plate x Generator drive end frame | 2.3 | 23 | 20 in.*lbf | |
| Generator coil assembly x Generator drive end frame | 5.9 | 60 | 52 in.*lbf | |
| Generator coil assembly x Generator brush holder assembly | 1.8 | 18 | 16 in.*lbf | |
| Generator coil assembly x Generator rear end cover | 4.6 | 47 | 41 in.*lbf | |
| Generator clutch pulley x Generator rotor assembly | with out SST | 111 | 1127 | 82 |
| with SST | 84 | 857 | 62 | |
| Generator assembly x Cylinder head sub-assembly | 34 | 347 | 25 | |
| Wire harness clamp bracket x Generator assembly | 8.4 | 85 | 73 in.*lbf | |
| Terminal B x wire harness | 9.8 | 100 | 787 in.*lbf | |
| Negative battery terminal x Negative battery cable | 5.4 | 55 | 48 in.*lbf | |