| Water inlet (Thermostat) | Valve opening temperature | 78 to 82°C (172 to 180°F) | |
| Valve lift | 8.5 mm (0.33 in.) or more at 93°C (199°F) | ||
| Cooling fan motor | 20°C (68°F) | 11.2 to 14.4 A | |
| Fan No. 1 relay | 3 - 5 | 10 kΩ or higher (Battery voltage not applied) | |
| 3 - 5 | Below 1 Ω(Battery voltage applied to terminals 1 and 2) | ||
| Fan No. 2 relay | 3 - 4 | Below 1 Ω (Battery voltage not applied) | |
| 3 - 4 | 10 kΩ or higher (Battery voltage applied to terminals 1 and 2) | ||
| 3 - 5 | 10 kΩ or higher (Battery voltage not applied) | ||
| 3 - 5 | Below 1 Ω (Battery voltage applied to terminals 1 and 2) | ||
| Cooling fan resistor | 20°C (68°F) | 1.17 to 1.43 Ω | |
| Radiator cap sub-assembly | Standard valve (for brand new cap) | 93.3 to 122.7 kPa (0.95 to 1.25 kgf/cm2, 13.5 to 17.8 psi) |
|
| Minimum standard valve (for using cap) | 78.5 kPa (0.80 kgf/cm2, 11.38 psi) |
||