1NR-FE ENGINE CONTROL TORQUE SPECIFICATIONS

Part tightened N*m kgf*cm ft.*lbf
Camshaft timing oil control valve assembly (for Intake Side) x Cylinder head cover sub-assembly 10 102 7
Camshaft timing oil control valve assembly (for Exhaust Side) x Cylinder head cover sub-assembly 10 102 7
Throttle with motor body assembly x Intake manifold 10 102 7
Air cleaner cap sub - assembly x No. 1 air cleaner hose 3.0 31 27 in.*lbf
Inlet No. 1 air cleaner x Cylinder head cover sub-assembly 7.8 80 69 in.*lbf
No. 1 ECM bracket x ECM 3.0 31 27 in.*lbf
No. 2 ECM bracket x ECM 3.0 31 27 in.*lbf
ECM x Body 8.0 82 71 in.*lbf
Inner cowl top to cowl brace x Body 7.0 71 62 in.*lbf
Inner cowl top to cowl brace x Outer cowl top panel 7.0 71 62 in.*lbf
Outer cowl top panel x Body 7.0 71 62 in.*lbf
Battery clamp 3.5 36 31 in.*lbf
Battery carrier x Body 17 173 13
Accelerator pedal sensor assembly x Body 5.4 55 48 in.*lbf
Mass air flow meter x Air cleaner cap sub-assembly 1.4 14 12 in.*lbf
Camshaft position sensor x Cylinder head cover sub-assembly 10 102 7
Crankshaft position sensor x Timing chain cover 10 102 7
Engine under cover RH x Body 5.0 51 44 in.*lbf
Spark plug x Cylinder head 20 204 15
No. 1 ignition coil assembly x Cylinder head cover 10 102 7
Engine coolant temperature sensor x Cylinder head 20 200 14
Knock sensor x Cylinder block 21 214 15
Manifold absolute pressure sensor x Intake manifold 5.0 51 44 in.*lbf
Air fuel ratio sensor x Exhaust manifold with SST 40 408 30
without SST 44 449 32
Heated oxygen sensor x Exhaust pipe with SST 40 408 30
without SST 44 449 32