| Spark plug | Standard resistance | 10 MΩ or higher | |
| Camshaft timing oil control valve | Standard resistance | 1 - 2 | 6.9 to 7.9 kΩ at 20°C (68°F) |
| Throttle body | Standard resistance | 1 (M-) - 2 (M+) | 0.3 to 100 Ω at 20°C (68°F) |
| Accel sensor out No. 1 | Standard voltage | Accelerator pedal is released | 0.5 to 1.1 V |
| Accelerator pedal is depressed | 2.5 to 4.5 V | ||
| Accel sensor out No. 2 | Standard voltage | Accelerator pedal is released | 1.2 to 2.0 V |
| Accelerator pedal is depressed | 3.4 to 4.7 V | ||
| Mass air flow meter | Standard resistance | 1 (THA) - 2 (E2) | 13.6 to 18.4 kΩ at -20°C (-4°F) |
| 2.21 to 2.69 kΩ at 20°C (68°F) | |||
| 0.49 to 0.67 kΩ at 60°C (140°F) | |||
| Engine coolant temperature sensor | Standard resistance | 1 - 2 | 2.32 to 2.59 kΩ at Approximately 20°C (68°F) |
| 0.310 to 0.326 kΩ at Approximately 80°C (176°F) | |||
| Knock sensor | Standard resistance | 1 - 2 | 120 to 280 kΩ at 20°C (68°F) |
| Manifold absolute pressure sensor | Standard voltage | B35-3 (VC) - B35-1 (E2) | 4.5 to 5.5 V at Ignition switch ON |
| Air fuel ratio sensor | Standard resistance | 1 (HA1A) - 2 (+B) | 1.6 to 3.2 Ω at 20°C (68°F) |
| 1 (HA1A) - 4 (A1A-) | 10 kΩ or higher | ||
| Heated oxygen sensor | Standard resistance | 1 (HT1B) - 2 (+B) | 11 to 16 Ω at 20°C (68°F) |
| 1 (HT1B) - 4 (E2) | 10 kΩ or higher | ||
| No. 1 integration relay | Standard resistance | 1C-1 - 1E-4 | 10 kΩ or higher (Battery voltage is not applied to terminals 1E-10 and 1D-7) |
| Below 1 Ω (Battery voltage is applied to terminals 1E-10 and 1D-7) |
|||
| 1E-4 - 1E-5 | 10 kΩ or higher (Battery voltage is not applied to terminals 1E-11 and 1D-9) |
||
| Below 1 Ω (Battery voltage is applied to terminals 1E-11 and 1D-9) |
|||
| 1C-1 - 1E-2 | 10 kΩ or higher (Battery voltage is not applied to terminals 1E-10 and 1D-17) |
||
| Below 1 Ω (Battery voltage is applied to terminals 1E-10 and 1D-17) |
|||
| 1C-1 - 1E-7 | 10 kΩ or higher (Battery voltage is not applied to terminals 1C-1 and 1D-18) |
||
| Below 1 Ω (Battery voltage is applied to terminals 1C-1 and 1D-18) |
|||