1ND-TV ENGINE CONTROL SERVICE DATA

Diesel throttle body assembly Resistance Standard 1 (M-) - 2 (M+) 0.3 to 100 Ω at 20°C (68°F)

Accelerator pedal

Accel Sensor Out No. 1

Voltage Standard Accelerator pedal is released 0.6 to 1.0 V
Voltage Standard Accelerator pedal is fully depressed 3.0 to 4.6 V

Accelerator pedal

Accel Sensor Out No. 2

Voltage Standard Accelerator pedal is released 1.4 to 1.8 V
Voltage Standard Accelerator pedal is fully depressed 3.7 to 5.0 V
Mass air flow meter Resistance Standard 4 (THA) - 5 (E2)

12.5 to 16.9 kΩ at -20° (-4°F)

2.19 to 2.67 kΩ at 20° (68°F)

0.50 to 0.68 kΩ at 60° (140°F)

Camshaft position sensor Resistance Standard 1 - 2 835 to 1400 Ω at Cold
1060 to 1645 Ω at Hot
Crankshaft position sensor Resistance Standard 1 (NE+) - 2 (NE-) 1630 to 2740 Ω at Cold
2065 to 3225 Ω at Hot
Engine coolant temperature sensor Resistance Standard 1 (E2) - 2 (THW) 2.32 to 2.59 kΩ at Approximately 20° (68°F)
0.310 to 0.326 kΩ at Approximately 80° (176°F)
Intake air temperature sensor Resistance Standard 1 - 2

2.21 to 2.65 kΩ(Approximately 20° (68°F))

0.55 to 0.61 kΩ(Approximately 60° (140°F))

Manifold absolute pressure sensor Voltage Standard 3 (VC) - 1 (E2)

4.5 to 5.5 V

(Ignition switch ON)

Air fuel ratio sensor Resistance Standard 5 (H-) - 2 (+B) 2.7 to 3.3 Ω at 20° (68°F)
5 (H-) - 4 (AF1+) 10KΩ or higher
Integration relay Resistance Standard 1C-1 - 1E-4

10KΩ or higher

(Battery voltage is not applied to terminals 1E- 10 and 1D-7)

Below 1Ω

(Battery voltage is applied to terminals 1E- 10 and 1D-7)

1E-4 - 1E-5

10KΩ or higher

(Battery voltage is not applied to terminals 1E- 11 and 1D-9)

Below 1Ω

(Battery voltage is applied to terminals 1E- 11 and 1D-9)

1C-1 - 1E-2

10KΩ or higher

(Battery voltage is not applied to terminals 1E- 10 and 1D-17)

Below 1Ω

(Battery voltage is applied to terminals 1E- 10 and 1D-17)

1C-1 - 1E-7

10KΩ or higher

(Battery voltage is not applied to terminals 1C- 1 and 1D-18)

Below 1Ω

(Battery voltage is applied to terminals 1C- 1 and 1D-18)