1KR-FE ENGINE CONTROL SERVICE DATA

Spark plug Standard resistance 10 MΩ or higher
Camshaft timing oil control valve Standard resistance 1 - 2 6.9 to 7.9 kΩ at 20°C (68°F)
Throttle body Standard resistance 1 (M-) - 2 (M+) 1.2 to 1.8 Ω at 20°C (68°F)
Accel sensor out No. 1 Standard voltage Accelerator pedal is released 0.7 to 1.2 V
Accelerator pedal is depressed 2.8 to 4.6 V
Accel sensor out No. 2 Standard voltage Accelerator pedal is released 1.2 to 2.0 V
Accelerator pedal is depressed 3.6 to 4.6 V
Crankshaft position sensor Standard resistance 1 - 2 1630 to 2740 Ω at Cold
2065 to 3225 Ω at Hot
Engine coolant temperature sensor Standard resistance 1 - 2 2.32 to 2.59 kΩ at Approximately 20°C (68°F)
0.310 to 0.326 kΩ at Approximately 80°C (176°F)
Knock sensor Standard resistance 1 - 2 120 to 280 kΩ at 20°C (68°F)
Manifold absolute pressure sensor Standard voltage B35-3 (VC) - B35-1 (E2) 4.5 to 5.5 V at Ignition switch ON
Manifold absolute pressure sensor Standard voltage B91-3 (VC) - B91-21 (E2) 4.5 to 5.5 V at Ignition switch ON
B91-1 (PIM) - B91-21 (E2) 4.5 to 5.0 V at Ignition switch ON
Standard Pressure Ignition switch ON 480 to 110 kPa (600 to 825 mmHg, 24 to 32 in.Hg)
Idling 28 to 48 kPa (210 to 360 mmHg, 8 to 14 in.Hg)
2500 rpm 22 to 50 kPa (165 to 375 mmHg, 6 to 15 in.Hg)
Standard resistance 2 (E2) - 4 (THA) 14.6 to 17.8 kΩ at -20°C (-4°F)
2.21 to 2.69kΩ at 20°C (68°F)
14.6 to 17.8 kΩ at 80°C (176°F)
Heated oxygen sensor Standard resistance 1 (HT1A) - 2 (+B) 6 to 14 Ω at 20°C (68°F)
1 (HT1A) - 4 (E1) 10 kΩ or higher
Heated oxygen sensor Standard resistance 1 (HT1B) - 2 (+B) 6 to 14 Ω at 20°C (68°F)
1 (HT1B) - 4 (E2) 10 kΩ or higher
No. 1 integration relay Standard resistance 1C-1 - 1E-4

10 kΩ or higher

(Battery voltage is not applied to terminals 1E-10 and 1D-7)

Below 1 Ω

(Battery voltage is applied to terminals 1E-10 and 1D-7)

1E-4 - 1E-5

10 kΩ or higher

(Battery voltage is not applied to terminals 1E-11 and 1D-9)

Below 1 Ω

(Battery voltage is applied to terminals 1E-11 and 1D-9)

1C-1 - 1E-2

10 kΩ or higher

(Battery voltage is not applied to terminals 1E-10 and 1D-17)

Below 1 Ω

(Battery voltage is applied to terminals 1E-10 and 1D-17)

1C-1 - 1E-7

10 kΩ or higher

(Battery voltage is not applied to terminals 1C-1 and 1D-18)

Below 1 Ω

(Battery voltage is applied to terminals 1C-1 and 1D-18)