ROCKER PANEL MOULDING DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE ROCKER PANEL MOULDING COVER LH


    1. Remove the 2 clips.

    2. Detach the claw and remove the rocker panel moulding cover LH as shown in the illustration.

      B004XAZC01
      B004RMI Remove in this Direction - -

  2. REMOVE NO. 1 SIDE MUDGUARD PROTECTOR

    Tech Tips

    When removing the No. 1 side mudguard protector, heat the body rocker panel moulding assembly LH and No. 1 side mudguard protector using a heat light.

    Standard
    Item Temperature
    Body Rocker Panel Moulding Assembly LH 20 to 30°C (68 to 86°F)
    No. 1 Side Mudguard Protector 20 to 30°C (68 to 86°F)

    CAUTION:


    • Do not touch the heat light and heated parts.

    • Touching the heat light may result in burns.

    • Touching heated parts for a long time may result in burns.

    B004UGDC40
    *a Heated Part
    *b Heat Light

    1. B004TE9

      Remove the No. 1 side mudguard protector.

  3. REMOVE FRONT ROCKER PANEL MOULDING END COVER LH

    Tech Tips

    When removing the front rocker panel moulding end cover LH, heat the body rocker panel moulding assembly LH and front rocker panel moulding end cover LH using a heat light.

    Standard
    Item Temperature
    Body Rocker Panel Moulding Assembly LH 20 to 30°C (68 to 86°F)
    Front Rocker Panel Moulding End Cover LH 20 to 30°C (68 to 86°F)

    CAUTION:


    • Do not touch the heat light and heated parts.

    • Touching the heat light may result in burns.

    • Touching heated parts for a long time may result in burns.

    B004UGDC40
    *a Heated Part
    *b Heat Light

    1. for Front Side:


      1. B004XJL

        Remove the front rocker panel moulding end cover LH.

    2. for Rear Side:


      1. B004V0W

        Remove the front rocker panel moulding end cover LH.

  4. REMOVE NO. 1 ROCKER PANEL MOULDING PROTECTOR (CAULKING SPONGE)

    Tech Tips

    When removing the No. 1 rocker panel moulding protector, heat the body rocker panel moulding assembly LH and No. 1 rocker panel moulding protector using a heat light.

    Standard
    Item Temperature
    Body Rocker Panel Moulding Assembly LH 20 to 30°C (68 to 86°F)
    No. 1 Rocker Panel Moulding Protector 20 to 30°C (68 to 86°F)

    CAUTION:


    • Do not touch the heat light and heated parts.

    • Touching the heat light may result in burns.

    • Touching heated parts for a long time may result in burns.

    B004UGDC40
    *a Heated Part
    *b Heat Light

    1. Remove the 2 No. 1 rocker panel moulding protectors.

      B004V8F

  5. REMOVE NO. 1 ROCKER PANEL MOULDING PROTECTOR (ALUMINUM TAPE)

    Tech Tips

    When removing the No. 1 rocker panel moulding protector, heat the body rocker panel moulding assembly LH and No. 1 rocker panel moulding protector using a heat light.

    Standard
    Item Temperature
    Body Rocker Panel Moulding Assembly LH 20 to 30°C (68 to 86°F)
    No. 1 Rocker Panel Moulding Protector 20 to 30°C (68 to 86°F)

    CAUTION:


    • Do not touch the heat light and heated parts.

    • Touching the heat light may result in burns.

    • Touching heated parts for a long time may result in burns.

    B004UGDC40
    *a Heated Part
    *b Heat Light

    1. B004WJ5

      for Front Side:


      1. Remove the No. 1 rocker panel moulding protector.

    2. B004R20

      for Rear Side:


      1. Remove the No. 1 rocker panel moulding protector.