FRONT BUMPER(for Sport Package) REASSEMBLY

PROCEDURE


  1. INSTALL FRONT BUMPER NO. 2 REINFORCEMENT SUB-ASSEMBLY

    Click here

  2. INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

    Click here

  3. INSTALL HEADLIGHT ASSEMBLY LH

    Click here

  4. INSTALL HEADLIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  5. INSTALL FRONT BUMPER SIDE RETAINER LH

    Click here

  6. INSTALL FRONT BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. INSTALL LOWER ARM BRACKET BRACE SUB-ASSEMBLY LH

    Click here

  8. INSTALL LOWER ARM BRACKET BRACE SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  9. INSTALL FRONT BUMPER NO. 2 ENERGY ABSORBER

    Click here

  10. INSTALL FRONT BUMPER ENERGY ABSORBER SUB-ASSEMBLY

    Click here

  11. INSTALL RADIATOR SHUTTER SUB-ASSEMBLY (w/ Grille Shutter)

    Click here

  12. INSTALL LOWER RADIATOR AIR GUIDE PLATE (w/ Grille Shutter)

    Click here

  13. INSTALL NO. 1 MOULDING TAPE

    Click here

  14. INSTALL LOWER RADIATOR GRILLE MOULDING


    1. B004XH3C01
      B004RMI Install in this Direction

      Attach the claw to install the lower radiator grille moulding as shown in the illustration.

    2. B004ROP

      Install the screw.

  15. INSTALL UPPER RADIATOR SEAL

    Click here

  16. INSTALL RADIATOR GRILLE MOULDING


    1. B004XFBC01
      B004RMI Install in this Direction

      Attach the claw to install the radiator grille moulding as shown in the illustration.

    2. B004R7N

      Install the 4 screws.

  17. INSTALL NUT


    1. B004RLV

      Install the 2 nuts.

  18. INSTALL RADIATOR GRILLE (OR FRONT PANEL) EMBLEM


    1. B004W9WC01
      B004RMI Install in this Direction

      Attach the guide and claw to install the radiator grille (or front panel) emblem as shown in the illustration.

    2. B004XJW

      Install the 2 screws.

  19. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET


    1. for Type A:


      1. B004RNT

        Install the front bumper extension mounting bracket with the 2 screws.

    2. for Type B:


      1. B004VLEC01
        B004RMI Install in this Direction

        Attach the claw to install the front bumper extension mounting bracket as shown in the illustration.

      2. B004U5V

        Install the 2 screws.

    3. for Type C:


      1. B004Y6DC01
        B004RMI Install in this Direction

        Attach the claw to install the front bumper extension mounting bracket as shown in the illustration.

      2. B004WEQ

        Install the 2 screws.

  20. INSTALL RADIATOR GRILLE ASSEMBLY


    1. Attach the guide and claw to install the radiator grille assembly as shown in the illustration.

      B004S02C01
      B004RMI Install in this Direction - -

    2. Install the 17 screws.

      B004UML

  21. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY


    1. for Stereo Camera Type:

      Click here

    2. for Mono Camera Type:

      Click here

  22. INSTALL FRONT TELEVISION CAMERA ASSEMBLY

    Click here

  23. INSTALL FRONT BUMPER HOLE COVER RH


    1. B004S3ZC01
      B004RMI Install in this Direction

      Install the anti-drop hook.

    2. Attach the claw to install the front bumper hole cover RH as shown in the illustration.

  24. INSTALL FRONT BUMPER RETAINER

    Click here

  25. INSTALL RADIATOR GRILLE BRACKET LH


    1. B004VWPC01
      B004RMI Install in this Direction

      Attach the claw to install the radiator grille bracket LH as shown in the illustration.

    2. B004SMX

      Install the 2 screws.

    3. Install the 2 clips as shown in the illustration.

  26. INSTALL RADIATOR GRILLE BRACKET RH

    Tech Tips

    Use the same procedure described for the LH side.

  27. INSTALL LOWER RADIATOR GRILLE BRACKET LH


    1. B004RZRC02
      B004RMI Install in this Direction

      Attach the guide to install the lower radiator grille bracket LH.

    2. Install the screw.

  28. INSTALL LOWER RADIATOR GRILLE BRACKET RH

    Tech Tips

    Use the same procedure described for the LH side.

  29. INSTALL FRONT BUMPER REINFORCEMENT EXTENSION LH


    1. B004R37

      Install the grommet to the front bumper reinforcement extension LH.

    2. B004VXZC02
      B004SZX Screw
      B004UK4 Clip

      Install the front bumper reinforcement extension LH with the clip.

    3. Install the 4 screws.

  30. INSTALL FRONT BUMPER REINFORCEMENT EXTENSION RH

    Tech Tips

    Use the same procedure described for the LH side.

  31. INSTALL FRONT BUMPER NO. 2 SIDE RETAINER LH

    Click here

  32. INSTALL FRONT BUMPER NO. 2 SIDE RETAINER RH

    Tech Tips

    Use the same procedure described for the LH side.

  33. INSTALL UPPER RADIATOR GRILLE


    1. Attach the guide to install the upper radiator grille.

    2. Install the 4 clips.

    3. Install the 6 screws.

      B004X9TC01
      B004SZX Screw B004UK4 Clip

  34. INSTALL RADIATOR GRILLE PROTECTOR

    Tech Tips

    When installing the radiator grille protector, heat the front bumper cover.

    Standard
    Item Temperature
    Front Bumper Cover 20 to 30°C (68 to 86°F)

    CAUTION:


    • Do not touch the heat light and heated parts.

    • Touching the heat light may result in burns.

    • Touching heated parts for a long time may result in burns.

    B004UGDC23
    *a Heated Part
    *b Heat Light

    1. Clean the front bumper cover surface.


      1. Remove the double-sided tape from the front bumper cover.

      2. Wipe off any tape adhesive residue with cleaner.

        Note


        • Installing the front bumper cover with some double-sided tape remaining may cause poor adhesion. Perform this procedure until sufficiently removed it.

        • Make sure to use a cloth when removing. Using a screwdriver, etc., may cause damage and poor adhesion.

    2. Apply primer to front bumper cover on the installation area of the radiator grille protector using a brush or felt.

      Note


      • Replace the brush or felt if it is dirty or has become hardened.

      • Keep any painted surface free from primer.

      • If the primer contacts a painted surface, it may leave light primer marks. Therefore, use protective tape when using liquid primer.

      • Do not touch surfaces to which primer has been applied until the radiator grille protector has been attached.

    3. Let the primer dry sufficiently.

      Note

      Do not touch applied surfaces until the primer is dry.

      Recommended drying time
      10 minutes or more (at 23 °C (73 °F))

    4. Remove the peeling paper of the new radiator grille protector trying not to touch the adhesional surface.

    5. Attach the clip and install the radiator grille protector as shown in the illustration.

      Note

      Press the radiator grille protector firmly to install it.

      B004WKIC01
      B004RMI Install in this Direction B004VGX Double-sided Tape

  35. INSTALL FRONT ULTRASONIC SENSOR CLIP

    Click here

  36. INSTALL FRONT CENTER ULTRASONIC SENSOR

    Click here

  37. INSTALL FRONT CORNER ULTRASONIC SENSOR RETAINER

    Click here

  38. INSTALL FRONT CORNER ULTRASONIC SENSOR

    Click here

  39. INSTALL NO. 4 ENGINE ROOM WIRE


    1. Attach the clamps to install the No. 4 engine room wire.

    2. Connect the 6 connectors.

      Note

      Do not apply excessive loads to the retainer. Otherwise, it may peel off.

      B004VD5

  40. INSTALL NO. 1 HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System)


    1. Attach the clamps to install the No. 1 headlight cleaner hose.

      B004VU0

  41. INSTALL NO. 2 WASHER BRACKET (w/ Headlight Cleaner System)

    Click here

  42. INSTALL WASHER BRACKET (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure described for the No. 2 washer bracket.

  43. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)

    Click here

  44. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure described for the LH side.

  45. INSTALL HEADLIGHT WASHER COVER LH (w/ Headlight Cleaner System)

    Click here

  46. INSTALL HEADLIGHT WASHER COVER RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure described for the LH side.