FRONT DOOR BELT MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT DOOR TRIM UPPER COVER LH

    Click here

  2. REMOVE FRONT DOOR ARMREST COVER LH

    Click here

  3. REMOVE FRONT DOOR NO. 2 ARMREST COVER LH

    Click here

  4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

  5. REMOVE FRONT DOOR TRIM COVER LH

    Click here

  6. REMOVE UPPER DOOR FRAME GARNISH LH

    Click here

  7. REMOVE FRONT DOOR GLASS INNER WEATHERSTRIP LH

    Click here

  8. REMOVE FRONT DOOR VENT SEAL LH

    Click here

  9. REMOVE FRONT DOOR NO. 3 WEATHERSTRIP LH

    Click here

  10. REMOVE FRONT DOOR NO. 2 WEATHERSTRIP LH

    Click here

  11. REMOVE FRONT DOOR BELT MOULDING LH


    1. B004WX8C01
      B004VGX Protective Tape

      Put protective tape around the front door belt moulding LH.

    2. B004S1UC01
      B004RMI Remove in this Direction

      Detach the claw and remove the front door belt moulding LH as shown in the illustration.