PRECAUTION FOR REPLACEMENT
Always prepare a new bulb for immediate replacement. While replacing a bulb, the lens may attract dust and moisture if removed from the vehicle for a long time.
Always replace a bulb with another bulb of the same wattage.
If only replacing the bulb on one side, differences in brightness and lighting color between the right and left sides may occur.
Securely install the socket after bulb replacement. The lens may become cloudy or the light cavity may fill with water through gaps around the socket if the socket is not installed securely.
PRECAUTION WHEN REPLACING HEADLIGHT ECU SUB-ASSEMBLY LH
If the headlight ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle information and initialize the headlight ECU sub-assembly LH.
HANDLING PRECAUTIONS FOR OBJECT RECOGNITION CAMERA (w/ Pre-collision System [for Stereo Camera Type])
The adaptive high beam system uses the object recognition camera. For precautions related to the object recognition camera, refer to Precaution for Front Camera System (for Stereo Camera Type).
HANDLING PRECAUTIONS FOR FORWARD RECOGNITION CAMERA (w/ Pre-collision System [for Mono Camera Type])
*1: w/ Adaptive High Beam System
*2: w/o Adaptive High Beam System
The adaptive high beam system*1 or automatic high beam system*2 uses the forward recognition camera. For precautions related to the forward recognition camera, refer to Precaution for Front Camera System (for Mono Camera Type).