RELAY ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT WINDSHIELD WIPER RELAY ASSEMBLY


    1. B004S68C39
      *a

      Component without harness connected

      (Windshield Wiper Relay Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher
      3 - 5 Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω

      Tech Tips

      If the result is not as specified, replace the windshield wiper relay assembly.

  2. INSPECT HEADLIGHT CLEANER CONTROL RELAY


    1. B004WB9C08
      *a

      Component without harness connected

      (Headlight Cleaner Control Relay)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Auxiliary battery voltage not applied between terminals 1 and 2 10 kΩ or higher
      3 - 5 Auxiliary battery voltage applied between terminals 1 and 2 Below 1 Ω

      Tech Tips

      If the result is not as specified, replace the headlight cleaner control relay.