Click here

WIPER SWITCH INSTALLATION

Click here
Click here

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the RH side.

Click here

PROCEDURE


  1. Click here

    INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY


    1. B004S3SC01
      B004RMI Install in this Direction

      Attach the claw and install the windshield wiper switch assembly as shown in the illustration.

  2. Click here

    INSTALL UPPER STEERING COLUMN COVER


    1. B004T5E

      Attach the clip and install the upper steering column cover to the meter hood spacer.

    2. B004REIC01
      B004RMI Install in this Direction

      Attach the claw and install the upper steering column cover.

  3. Click here

    INSTALL LOWER STEERING COLUMN COVER


    1. B004WYOC01
      B004RMI Install in this Direction

      Push the lower steering column cover in the direction of the arrow shown in the illustration to install it, taking care not to catch the tilt and telescopic switch.

    2. B004SF3

      Attach the claw as shown in the illustration.

      Note:

      Check that the claw is securely engaged.

    3. Install the screw.

    4. Turn the steering wheel assembly 90° to the left from the straight condition and install the screw.

    5. Turn the steering wheel assembly 90° to the right from the straight condition and install the screw.

  4. Click here

    CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM SETTINGS

    Click here