Click here

SEAT BELT SYSTEM, Diagnostic DTC:B200713

Click here
Click here
DTC Code DTC Name
B200713 Seat Belt Motor FL Circuit Open
Click here

DESCRIPTION

DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Note
B200713 Seat Belt Motor FL Circuit Open Open circuit in motor circuit of front passenger side seat outer belt assembly

  • Front seat outer belt assembly LH

  • Seat belt control ECU

  • Harness or connector

PCS Warning Light:

Blinks

 "Pre-Collision System Malfunction Visit Your Dealer" is displayed on the multi information display (in the combination meter assembly)
Table 1. *a Front Seat Outer Belt Assembly LH *b Seat Belt Control ECU
Click here

WIRING DIAGRAM

Click here

PROCEDURE


  1. Click here

    INSPECT FRONT SEAT OUTER BELT ASSEMBLY LH


    1. Remove the front seat outer belt assembly LH.

      Click here

    2. Inspect the front seat outer belt assembly LH.

      Click here

      Result
      Proceed to
      OK
      NG

  2. Click here

    CHECK HARNESS AND CONNECTOR (SEAT BELT CONTROL ECU - FRONT SEAT OUTER BELT ASSEMBLY LH)


    1. Disconnect the L59 seat belt control ECU connector.

    2. Disconnect the L27 front seat outer belt assembly LH connector.

    3. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      L59-11 (MOL+) - L27-1 (MOL+) Always Below 1 Ω
      L59-10 (MOL-) - L27-2 (MOL-) Always Below 1 Ω
      Result
      Proceed to
      OK
      NG

    • OK

      REPLACE SEAT BELT CONTROL ECUClick here

    • NG

      REPAIR OR REPLACE HARNESS OR CONNECTOR