Click here

SEAT BELT SYSTEM VEHICLE CONTROL HISTORY

Click here
Click here
Click here
  1. CHECK VEHICLE CONTROL HISTORY (SEAT BELT CONTROL SYSTEM)


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Powertrain / Seat Belt Control / Utility / Vehicle Control History.


      1. Body Electrical > Seat Belt Control > Utility
        Tester Display
        Vehicle Control History




      Table 1. Vehicle Control History
      Code Tester Display Measurement Item Diagnostic Note
      X2041 Steering Wheel Location Malfunction History of vehicle model malfunction signals output by the main body ECU (multiplex network body ECU) "Pre-Collision System Malfunction Visit Your Dealer" is displayed and PCS indicator blinks
      X2042 Driver Side Seat Belt Buckle Switch Malfunction History of buckle switch malfunction signals output by the airbag ECU assembly "Pre-Collision System Malfunction Visit Your Dealer" is displayed and PCS indicator blinks
      X2043 Passenger Side Seat Belt Buckle Switch Malfunction
      X2040 Request for seatbelt control system operation outside of safe voltage range

      Motor operation request during voltage outside of safe voltage range detected

      When a request signal is received, the following is detected.


      • Time stamp information

      • Total distance traveled

      • Seatbelt operation request

      • Standard Voltage

      -
      X2044 Sudden braking/vehicle condition-linked reception

      Pre-crash seatbelt standby operation

      When a request signal is received, the following is detected.


      • Time stamp information

      • Total distance traveled

      • Vehicle speed information

      • Airbag ECU assembly buckle assembly

      • Steering wheel information

      • Overheating protection detection state

      • VSC-ACT state

      • PCS READY Flag information

      -
      X2045 Radar-linked reception

      Pre-crash seatbelt standby operation

      When a request signal is received, the following is detected.


      • Time stamp information

      • Total distance traveled

      • Vehicle speed information

      • Airbag ECU assembly buckle assembly

      • Steering wheel information

      • Overheating protection detection state

      -
  2. CHECK VEHICLE CONTROL HISTORY (AIRBAG SYSTEM)

    Tip:

    A part of the control history can be confirmed using the vehicle control history.

    Click here