AIR CONDITIONING SYSTEM INITIALIZATION

INITIALIZATION SERVO MOTOR

1. Turn the power switch off.

2. Connect the GTS to the DLC3.

3. Turn the power switch on (IG).

4. Press the A/C OFF switch.

5. Turn the GTS on.

6. Enter the following menus: Body Electrical / Air Conditioner / Utility / Servomotor Initialization.

7. According to the GTS display, perform servo motor initialization.

   
   
   1. Body Electrical > Air Conditioner > Utility

      Tester Display
      Servomotor Initialization

   2. 
      
      1. 
         
   3. 
      
      10. 
          
   Tip:

   During initialization, the AUTO indicator light comes on, and then goes off when initialization has finished.

8. According to the GTS display, select the Exit switch to finish initialization.