Click here

SEAT BELT WARNING LIGHT REMOVAL

Click here
Click here

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

Click here

PROCEDURE


  1. Click here

    REMOVE MULTI-DISPLAY

    Click here

  2. Click here

    REMOVE TELLTALE LIGHT ASSEMBLY


    1. B004V4MC01
      B004VGX Protective Tape
      B004RMI Remove in this Direction

      Using a thin-bladed screwdriver, push in the direction indicated by the arrow shown in the illustration to detach the claw and remove the telltale light assembly.

      Note:

      When removing the telltale light assembly, make sure that no dust, etc., enters the inside of the multi-display.

      Tip:

      Tape the thin-bladed screwdriver tip before use.