Click here

SEAT BELT WARNING SYSTEM(w/ Occupant Classification System) DATA LIST / ACTIVE TEST

Click here
Click here
Click here

  1. DATA LIST

    Tip:

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note:

    In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Combination Meter, Occupant Detection, SRS Airbag or Main Body / Data List.

    5. Read the Data List according to the display on the GTS.


      1. Body Electrical > Combination Meter > Data List
        Tester Display Measurement Item Range Normal Condition Diagnostic Note
        Rear Right Seat Buckle / Occupant Detection Warning Switch Rear seat inner with center belt RH buckle signal ON or OFF

        ON: Rear RH seat belt not fastened

        OFF: Rear RH seat belt fastened

        		 -
        Rear Left Seat Buckle / Occupant Detection Warning Switch Rear seat inner with center belt LH (for LH) buckle signal ON or OFF

        ON: Rear LH seat belt (for LH) not fastened

        OFF: Rear LH seat belt (for LH) fastened

        		 -
        Rear Center Seat Buckle / Occupant Detection Warning Switch Rear seat inner with center belt LH (for center) buckle signal ON or OFF

        ON: Rear LH seat belt (for center) not fastened

        OFF: Rear LH seat belt (for center) fastened

        		 -
        Driver Seatbelt Warning Buzzer Function Driver seat belt warning buzzer ON or OFF Customized setting displayed -
        Passenger Seatbelt Warning Buzzer Function Front passenger seat belt warning buzzer ON or OFF Customized setting displayed -
        Rear Right Seatbelt Warning Buzzer Function Rear RH seat belt warning buzzer ON or OFF Customized value displayed -
        Rear Left Seatbelt Warning Buzzer Function Rear LH seat belt warning buzzer ON or OFF Customized value displayed -
        Rear Center Seatbelt Warning Buzzer Function Rear center seat belt warning buzzer ON or OFF Customized value displayed -










      1. Body Electrical > Occupant Detection > Data List
        Tester Display Measurement Item Range Normal Condition Diagnostic Note
        Passenger Buckle SW Front passenger buckle switch Unset, Set or NG

        Unset: Seat belt not fastened

        Set: Seat belt fastened

        NG: Data is not determined

        		 -



      1. Body Electrical > SRS Airbag > Data List
        Tester Display Measurement Item Range Normal Condition Diagnostic Note
        Left side Buckle SW Driver side buckle switch Unset, Set or NG

        Unset: Seat belt not fastened

        Set: Seat belt fastened

        NG: Data is not determined

        		 -
        Right side Buckle SW Front passenger side buckle switch Unset, Set or NG

        Unset: Seat belt not fastened

        Set: Seat belt fastened

        NG: Data is not determined

        		 -




      1. Body Electrical > Main Body > Data List
        Tester Display Measurement Item Range Normal Condition Diagnostic Note
        RR Door Courtesy SW Rear door courtesy light switch RH ON or OFF

        ON: Rear door RH open

        OFF: Rear door RH closed

        		 -
        RL Door Courtesy SW Rear door courtesy light switch LH ON or OFF

        ON: Rear door LH open

        OFF: Rear door LH closed

        		 -



  2. ACTIVE TEST

    Tip:

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Combination Meter / Active Test.

    5. Perform the Active Test according to the display on the GTS.


      1. Body Electrical > Combination Meter > Active Test
        Tester Display Measurement Item Control Range Diagnostic Note
        Buzzer Operation (800Hz, Vol L, W/ Damping)

        Combination meter buzzer


        • Frequency: 800Hz

        • Volume: Large

        • Fading tone

        		 ON -
        Buzzer Operation (800Hz, Vol L, W/O Damping)

        Combination meter buzzer


        • Frequency: 800Hz

        • Volume: Large

        • Continuous tone

        		 ON -
        Buzzer Operation (800Hz, Vol S, W/ Damping)

        Combination meter buzzer


        • Frequency: 800Hz

        • Volume: Small

        • Fading tone

        		 ON -
        Buzzer Operation (800Hz, Vol S, W/O Damping)

        Combination meter buzzer


        • Frequency: 800Hz

        • Volume: Small

        • Continuous tone

        		 ON -
        Driver Side Seat Belt Warning Driver side seat belt warning light OFF/ON -
        Passenger Side Seat Belt Warning Front passenger side seat belt warning light OFF/ON Not applicable to this vehicle
        Rear Seat Belt Warning Rear seat belt warning light OFF/ON Not applicable to this vehicle