SEAT HEATER CONTROL(for Fixed Seat Type) INSTALLATION

CAUTION / NOTICE / HINT

• Wear protective gloves. Sharp areas on the parts may injure your hands.

• There is risk of injury.

PROCEDURE

1. Click here

   INSTALL SEAT HEATER CONTROL SUB-ASSEMBLY LH

   
   
   1. 

      Attach the clamp and install the seat heater control sub-assembly LH.

   2. Connect the connector.

   3. 

      *a	Hog Ring Pliers

      Using hog ring pliers, install 3 new hog rings.

      Note:
      

      • Be careful not to damage the separate type rear seatback cover LH.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover LH.

2. Click here

   INSTALL SEAT HEATER CONTROL SUB-ASSEMBLY RH

   Tip:

   Use the same procedure described for the LH side.

3. Click here

   INSTALL REAR SEATBACK HOLDER

   Click here

4. Click here

   INSTALL REAR SEAT CUSHION LOCK HOOK

   Click here

5. Click here

   INSTALL REAR SEATBACK ASSEMBLY

   Click here

6. Click here

   INSTALL NO. 1 SEAT ARMREST CAP

   Click here

7. Click here

   INSTALL REAR SEAT CUSHION ASSEMBLY

   Click here

8. Click here

   CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Click here

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

9. Click here

   CHECK SRS WARNING LIGHT

   Click here

10. Click here

    INSPECT SEAT HEATER SYSTEM

    Click here